From the BlogSubscribe Now

Hugo’s iPhone X – Setting Up with Voice Over – iBT096

Hugo takes us on the journey of setting up his new iPhone X, and discovers the gestures needed now the home button is gone. 

Hugo’s iPhone X – Setting Up with Voice Over – iBT096

Hugo takes us on the journey of setting up his new iPhone X, and discovers the gestures needed now the home button is gone. 

Rendering Out Your Project and Consolidating/Exporting your Tracks in Reaper – iBT095

This tutorial goes through the Render, and the Consolidate/Export tracks dialogs. You can bring up the Render dialog through the File menu or by pressing Control+Alt+R (Win), Command+Option+R (Mac), and access the consolidate dialog through the File menu. I also introduce the shortcuts to fade in or out an item.

Rendering Projects and Tracks

There are a number of parameters that can be set within the Render dialog which include:

  • File Name
  • Sample rate
  • Location for the file
  • File Type to be Rendered
  • Parameters that pertain to the selected file type
  • Resample mode. If you have components of your project at various different sample rates, when they are rendered to the new file, this option lets you set the quality of this resampling.
  • The boundaries of what is to be rendered. In the Bounce option, you can choose from the entire Project, which is the default. A time selection, so make a time selection in the project and than choose this option to have only that portion rendered out. There are also options for Project regions and the ability to define a custom time range from within the render dialog.
  • Master, or selected tracks. . The Source pop up lets you set what is rendered. You can choose from a number of options. By default the master track is rendered, so the mix down of all your tracks that are sent through the master, what you actually hear by default when you play your project. It also gives you the option to choose only specific tracks and render them out as separate files, known as stems. To do this, select the tracks within your project you want to have as stems. Then open the render dialog and under Source, pick, Stems -selected tracks. This will create separate files for each track you selected. Note these are stems and as such will include the result of any track effects that have been applied.

Once you’ve set the render options to your liking, you can render out the project, or add the render to a queue for later rendering.

Consolidate/Export tracks

The Consolidate/Export tracks dialog, Within the File menu is another option that gives much of the same functionality however it is designed to consolidate or export out the individual tracks rather than the master mix. As noted above in the render section, you can render stems through the render dialog with track effects included. Many of the options for picking what is to be exported are the same in the Consolidate/Export Tracks dialog. You can pick the whole project, or a part/time selection as well as which tracks to consolidate. However the track effects, and track Volumes, etc, are not included. It will create single files for each track that are copies of the source media for the track, or the active take. There is also an option to have silent sections on tracks ignored. So if you have a track that has two sections with audio, and a period of silence in between, a separate file will be created for each part of the track with audio, rather than one single file that includes the silence. This is suitable if your using the files within the existing project, however may not be the best solution if you’re sharing the files.

The dialog is very useful for cleaning up a project. It allows you to update the files referenced by your project with the newly created files. If you have a track with various file types and names, you can consolidate this to a single file for each track. This is however a destructive process.

Relevant Keyboard Shortcuts

  • Cmd+Opt+R File: Render project to disk…
  • Opt+R File: Render project, using the most recent render settings, with a new target file name…
  • Cmd+Opt+Shift+A File: Add project to render queue, using the most recent render settings
  • Cmd+Opt+Q File: Open render queue
  • Cmd+Opt+I Item: Fade items in to cursor
  • Cmd+Opt+O Item: Fade items out from cursor

Rendering Out Your Project and Consolidating/Exporting your Tracks in Reaper – iBT095

This tutorial goes through the Render, and the Consolidate/Export tracks dialogs. You can bring up the Render dialog through the File menu or by pressing Control+Alt+R (Win), Command+Option+R (Mac), and access the consolidate dialog through the File menu. I also introduce the shortcuts to fade in or out an item.

Rendering Projects and Tracks

There are a number of parameters that can be set within the Render dialog which include:

  • File Name
  • Sample rate
  • Location for the file
  • File Type to be Rendered
  • Parameters that pertain to the selected file type
  • Resample mode. If you have components of your project at various different sample rates, when they are rendered to the new file, this option lets you set the quality of this resampling.
  • The boundaries of what is to be rendered. In the Bounce option, you can choose from the entire Project, which is the default. A time selection, so make a time selection in the project and than choose this option to have only that portion rendered out. There are also options for Project regions and the ability to define a custom time range from within the render dialog.
  • Master, or selected tracks. . The Source pop up lets you set what is rendered. You can choose from a number of options. By default the master track is rendered, so the mix down of all your tracks that are sent through the master, what you actually hear by default when you play your project. It also gives you the option to choose only specific tracks and render them out as separate files, known as stems. To do this, select the tracks within your project you want to have as stems. Then open the render dialog and under Source, pick, Stems -selected tracks. This will create separate files for each track you selected. Note these are stems and as such will include the result of any track effects that have been applied.

Once you’ve set the render options to your liking, you can render out the project, or add the render to a queue for later rendering.

Consolidate/Export tracks

The Consolidate/Export tracks dialog, Within the File menu is another option that gives much of the same functionality however it is designed to consolidate or export out the individual tracks rather than the master mix. As noted above in the render section, you can render stems through the render dialog with track effects included. Many of the options for picking what is to be exported are the same in the Consolidate/Export Tracks dialog. You can pick the whole project, or a part/time selection as well as which tracks to consolidate. However the track effects, and track Volumes, etc, are not included. It will create single files for each track that are copies of the source media for the track, or the active take. There is also an option to have silent sections on tracks ignored. So if you have a track that has two sections with audio, and a period of silence in between, a separate file will be created for each part of the track with audio, rather than one single file that includes the silence. This is suitable if your using the files within the existing project, however may not be the best solution if you’re sharing the files.

The dialog is very useful for cleaning up a project. It allows you to update the files referenced by your project with the newly created files. If you have a track with various file types and names, you can consolidate this to a single file for each track. This is however a destructive process.

Relevant Keyboard Shortcuts

  • Cmd+Opt+R File: Render project to disk…
  • Opt+R File: Render project, using the most recent render settings, with a new target file name…
  • Cmd+Opt+Shift+A File: Add project to render queue, using the most recent render settings
  • Cmd+Opt+Q File: Open render queue
  • Cmd+Opt+I Item: Fade items in to cursor
  • Cmd+Opt+O Item: Fade items out from cursor

Side Chain Compression in Reaper, Ducking for Voice Overs – iBT-094

Setting up a side chain in reaper is relatively straight forward. First what is a side chain? There’s many situations in which a side chain could be useful, and I will show one example today. In essence, a side chain is where you use the output of one track to control the effects on another track. The example I’ll go through is where you want to have your background music on one track automatically lowered in volume, or ducked, when there is speech on another track. So for example your podcast intro music is ducked when you start speaking. As usual I’ll demo this on the Mac, however you can follow the same process on windows. Before we start there’s a couple of other concepts to cover, and the first part of the tutorial is some revision of concepts already covered in this series. This includes a little on recording, editing with items, and the impact of your ripple setting. The tutorial also briefly introduces a couple of the available ways to normalise audio within reaper.

So let’s look at the basic way audio flows through reaper in a simple default setup. Whether the source is your Microphone or a file you’ve inserted on a track, the source will have an inherent volume as it comes in and goes on to the track. You can adjust the volume of the file or add input effects as it comes in and goes on the track. Once it hits the track you can also add effects and adjust the volume/pan of the track. The audio is then routed on to the Master track along with other tracks in the project. Once again you can adjust volume/pan, and add effects at this stage. It is the output of the master track that you then hear through your hardware outputs and what is printed to any file that your render. You can set up sends or receives which are basically just sending the audio from one track to another track before it reaches the master track. So for example, audio from a number of vocal tracks could be sent to a track that has a reverb instantiated on it. In this way, rather than setting up multiple copies of a reverb on multiple tracks, one copy of the reverb can be set up and the audio of a number of tracks can be affected by it. The audio that is on the original track can be optionally sent to the master track or not, depending on the specific requirements.

In the side chain we will be setting up in this tutorial, we will be sending the audio from our vocal track to the music track. We will still want the vocal track to go straight to the master track so we can hear it. The copy that is sent to the music track will not be heard in the master however it will be used to compress the volume of the music, or in other words, to duck the music. We have a track with music, and a track with a voice over. To set up the side chain, go to the music track and press “I”. This will bring up the routing for the track. First step is to change the music track from a standard 2 channel stereo track to a 4 channel track. Next setup a receive from the vocal track to the music track. Next, set the destination of the send from the vocal track to the third and fourth tracks of the music tracks. You will then have a copy of the audio from the vocal track being sent to the music track, however instead of being mixed with the first and second channels, it will be received on the third and fourth channels, and won’t be actually heard in the output of the track. In this way it can influence effects that are applied to the music track even though it won’t be heard there.

Now, we can add a compressor to our music track. In this tutorial, we are using the included compressor, Reacomp. Set the detector input of Reacomp to aux 3/4. This means that it will compress the audio on the music track, but instead of being triggered by the music, it will be triggered by the audio on the aux channels, that is the vocal we sent to channels three and four.

Finally, we need to set up the compressor suitably to compress the music enough to hear the voice over. Set the ratio to a suitable value, at least 4/1 or higher, in the demo I set it to 6/1. You can use the precomp and attack parameters to affect how quickly the audio is ducked and the release parameter to affect how quickly the audio returns to it’s original volume once the voice over stops. The lower you set the threshold, the quieter the music will be while it is being compressed. We have now set up a side chain to duck our music while speaking. This may seem fairly complex at first, however understanding the concepts covered will help with lots of task you might want to undertake in Reaper, or any professional DAW

Keyboard Shortcuts

  • Shift+PageUp/PageDown SWS: Nudge active take volume up/Down
  • Shift+N Item properties: Normalize multiple items to common gain
  • Command+Shift+N Item properties: Normalize items
  • I Track: View I/O for current track

Side Chain Compression in Reaper, Ducking for Voice Overs – iBT-094

Setting up a side chain in reaper is relatively straight forward. First what is a side chain? There’s many situations in which a side chain could be useful, and I will show one example today. In essence, a side chain is where you use the output of one track to control the effects on another track. The example I’ll go through is where you want to have your background music on one track automatically lowered in volume, or ducked, when there is speech on another track. So for example your podcast intro music is ducked when you start speaking. As usual I’ll demo this on the Mac, however you can follow the same process on windows. Before we start there’s a couple of other concepts to cover, and the first part of the tutorial is some revision of concepts already covered in this series. This includes a little on recording, editing with items, and the impact of your ripple setting. The tutorial also briefly introduces a couple of the available ways to normalise audio within reaper.

So let’s look at the basic way audio flows through reaper in a simple default setup. Whether the source is your Microphone or a file you’ve inserted on a track, the source will have an inherent volume as it comes in and goes on to the track. You can adjust the volume of the file or add input effects as it comes in and goes on the track. Once it hits the track you can also add effects and adjust the volume/pan of the track. The audio is then routed on to the Master track along with other tracks in the project. Once again you can adjust volume/pan, and add effects at this stage. It is the output of the master track that you then hear through your hardware outputs and what is printed to any file that your render. You can set up sends or receives which are basically just sending the audio from one track to another track before it reaches the master track. So for example, audio from a number of vocal tracks could be sent to a track that has a reverb instantiated on it. In this way, rather than setting up multiple copies of a reverb on multiple tracks, one copy of the reverb can be set up and the audio of a number of tracks can be affected by it. The audio that is on the original track can be optionally sent to the master track or not, depending on the specific requirements.

In the side chain we will be setting up in this tutorial, we will be sending the audio from our vocal track to the music track. We will still want the vocal track to go straight to the master track so we can hear it. The copy that is sent to the music track will not be heard in the master however it will be used to compress the volume of the music, or in other words, to duck the music. We have a track with music, and a track with a voice over. To set up the side chain, go to the music track and press “I”. This will bring up the routing for the track. First step is to change the music track from a standard 2 channel stereo track to a 4 channel track. Next setup a receive from the vocal track to the music track. Next, set the destination of the send from the vocal track to the third and fourth tracks of the music tracks. You will then have a copy of the audio from the vocal track being sent to the music track, however instead of being mixed with the first and second channels, it will be received on the third and fourth channels, and won’t be actually heard in the output of the track. In this way it can influence effects that are applied to the music track even though it won’t be heard there.

Now, we can add a compressor to our music track. In this tutorial, we are using the included compressor, Reacomp. Set the detector input of Reacomp to aux 3/4. This means that it will compress the audio on the music track, but instead of being triggered by the music, it will be triggered by the audio on the aux channels, that is the vocal we sent to channels three and four.

Finally, we need to set up the compressor suitably to compress the music enough to hear the voice over. Set the ratio to a suitable value, at least 4/1 or higher, in the demo I set it to 6/1. You can use the precomp and attack parameters to affect how quickly the audio is ducked and the release parameter to affect how quickly the audio returns to it’s original volume once the voice over stops. The lower you set the threshold, the quieter the music will be while it is being compressed. We have now set up a side chain to duck our music while speaking. This may seem fairly complex at first, however understanding the concepts covered will help with lots of task you might want to undertake in Reaper, or any professional DAW

Keyboard Shortcuts

  • Shift+PageUp/PageDown SWS: Nudge active take volume up/Down
  • Shift+N Item properties: Normalize multiple items to common gain
  • Command+Shift+N Item properties: Normalize items
  • I Track: View I/O for current track

iPhone and Tesla, The Next Generation – iBT93

Join Shaun, Garth and Kayaker in this latest Audio Pizza roundtable discussion as concern grows over Garths out of control domain name habit. Is an intervention the answer?

Shaun then goes on to discuss the recent iPhone 8 leaks concerning the fate of the Touch ID fingerprint scanner. Can Apple really be ready to retire your finger in favour of your face?

Kayaker then tells us of his recent trips to New York and Las Vegas, and just how well his Aira glasses performed. Sir Patrick Stewart and Levar Burton seemed to be impressed anyway.

Finally, Garth tells us why he’s so excited by the Tesla Model 3. With his deposit down he predicts that Model 3 will be the tipping point, the start of the smart electric car as a serious option for the masses.

Subscribe to Audio Pizza

iPhone and Tesla, The Next Generation – iBT93

Join Shaun, Garth and Kayaker in this latest Audio Pizza roundtable discussion as concern grows over Garths out of control domain name habit. Is an intervention the answer?

Shaun then goes on to discuss the recent iPhone 8 leaks concerning the fate of the Touch ID fingerprint scanner. Can Apple really be ready to retire your finger in favour of your face?

Kayaker then tells us of his recent trips to New York and Las Vegas, and just how well his Aira glasses performed. Sir Patrick Stewart and Levar Burton seemed to be impressed anyway.

Finally, Garth tells us why he’s so excited by the Tesla Model 3. With his deposit down he predicts that Model 3 will be the tipping point, the start of the smart electric car as a serious option for the masses.

Subscribe to Audio Pizza

Adding Effects in Reaper – iBT92

  

This tutorial looks at adding effects to tracks or items. It briefly covers the very capable EQ and Compressor included with Reaper.

Keyboard Shortcuts

  • F Track: View FX chain for current track
  • Shift+F Track: View FX chain for master track
  • Shift+E Item: Show FX chain for item take
  • B Track: Toggle FX bypass for current track
  • Command+Option+M View: Toggle master track visible

To support the Audio Pizza Team and Blind FM. Please subscribe in iTunes or Donate here

Adding Effects in Reaper – iBT92

  

This tutorial looks at adding effects to tracks or items. It briefly covers the very capable EQ and Compressor included with Reaper.

Keyboard Shortcuts

  • F Track: View FX chain for current track
  • Shift+F Track: View FX chain for master track
  • Shift+E Item: Show FX chain for item take
  • B Track: Toggle FX bypass for current track
  • Command+Option+M View: Toggle master track visible

To support the Audio Pizza Team and Blind FM. Please subscribe in iTunes or Donate here